| RV
FORUM SPECIALS!!! |
LED
replacement for 1156, 1141, or any white (clear) bulb using a single
contact BA15s style base
Shedding new light on
the Recreational Vehicle Industry by introducing to the aftermarket,
the perfect LED replacement bulb!!
Been looking for the
perfect LED to upgrade your RVs interior lighting with? THIS IS
IT!! |
- Cool
operating temperature
- Soft, powerful glow
- Warm White color
temperature (3150k), not the "blueish white" of most
other white LED lights
- Fits nearly all light
fixtures, interior and exterior which use the standard bayonet
style base that has a single contact on the bottom
- 360 degrees of illumination
- 252 Lumens
- Operating voltage
range: 10-30V DC
|
|
Base style BA15s:

|
Price:
$15.00
(regular price:
$15.95) |
|
|
| LED
replacement for 1076, or any white (clear) bulb using a DUAL contact
BA15d style base |
Interior
LED replacement for reading lights / wall sconces that use a dual
contact, non offset base.
Non offset base means the two alignment pins are like the diagram
above shows - the two side pins are aligned with each other, the
bulb will fit in the socket either way. |
|
Base style BA15d:

|
Price:
$15.00
|
|
|
| T-10
Wedge base style LED |
| Works
well in the the oak reading lights that many Northwood RVs use,
including truck campers
- Cool operating temperature
- Soft, powerful glow
- 75 Lumens
- Warm White color
temperature (3150k), not the "blueish white" of most
other white LED lights
- Operating range: 8-18V
DC
- 15 LEDs, SMD3528
|
 |
Price:
$7.50 |
|
|
|
| 10
LED Unit
140
Lumens
Operating voltage range: 8-30V DC
Current draw: 205ma
Dimmable
|
Fits
the 3" and 4.5" recessed
halogen fixtures |
 |
| Price:
$14.00 |
|
|
18
LED Unit
183 Lumens
Fits 4.5" halogen recessed fixtures
Operating voltage range: 8-30V DC
Current draw: 220ma |
|
|
| Price:
$15.00 |
|
|
This
LED light is an excellent choice to replace incandescent clearance
/ marker lamps on RVs.
This model is photometrically
certified (PC), which means it is suitable for installation at various
angles.
Photos and notes of this
model installed on an RV can be seen here.
Additional photos, with some showing the clear lens version are
here.
Installation write up
can be seen here
When installing
these lights on RVs, we recommend Geocel ProFlex RV sealant. If
reflectors are needed, order them here
Installation
instructions |
- One piece sealed unit
- no base required for mounting
- Fits standard 3"
spaced mounting holes
|
- Epoxy resin coated
solid state circuitry
- Power connection is
made via two wires that exit the back of light at the center.
White is ground, black is positive.
|
Red -
$10.45
|
|

Amber
- $10.45 |
|
| |
| Specifications: |
|
Dimensions: |
| LED's:
Width:
Height:
Depth:
Voltage:
Mounting hole spacing: |
14
5mm diodes
4.0"
2 1"
1.0"
7.7-14 VDC
3" center to center |
 |
|
|
| Back
to top |
| |
| |